• Orders placed after Friday 2PM won't be processed or shipped until the next business day — View Policy →

Offroad Gear

34 products

  • ARAI VX-Pro4 Helmet - Van Beveren ARAI VX-Pro4 Helmet - Van Beveren

    ARAI ARAI VX-Pro4 Helmet - Van Beveren

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Arai VX-Pro4 in the Adrien Van Beveren replica graphic: Arai's off-road helmet with a PB-CLC shell, a rounded chin bar, a removable neck roll and emergency-release cheek pads. Features Peripherally Belted Complex Laminate Construction (PB-CLC) shell Chin bar vent grill installed on a rounded chin bar, mounted from the outside on the exterior vent cap and can be easily removed for cleaning or damage replacement—vent cap also designed to break way from the chin bar in event of impact Features intermediate oval shape which fits the majority of head shapes in the North American markets Consistently round and smooth shell, maintaining Glancing Off shape concept Super Fiber provides 30% higher tensile strength than standard fiberglass and provides increased penetration resistance Rounded chin bar maintains compact shell length resulting in less protrusion, leaving it less likely to catch and dig during a spill The Air-Through top-rear-duct center brace also functions as a goggle-strap locator Diffusers can be removed or replaced quickly and easily by removing a single screw on the rear-duct center brace Removable neck roll allows easy and convenient cleaning of the helmet Emergency release cheek pad design allows trained medical personnel easier access to an injured rider, reducing the chance of unintentional injury Air outlets on the peak are made larger to compensate for increased lift and is made with durable, yet extremely flexible material, mounted with plastic screws designed to break on impact, so as to not snag on impact which could send energy into the helmet or cause excess rotational force

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $859.95

  • Alpinestars Supertech M10 Helmet - Era - MIPS® - Gloss Pink/Violet/Yellow Fluo Alpinestars Supertech M10 Helmet - Era - MIPS® - Gloss Pink/Violet/Yellow Fluo

    Alpinestars Alpinestars Supertech M10 Helmet - Era - MIPS®

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Alpinestars Supertech M10 in the Era graphic: a carbon multi-composite motocross helmet with MIPS®, 28 vent ports and the A-Head fitment system. Features The S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact Equipped with MIPS® Multi-directional Impact Protection System Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts Eject technology includes the eject helmet removal system Rotational acceleration and oblique impact performance Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $839.95

  • Alpinestars SM7 Helmet - Cast Alpinestars SM7 Helmet - Cast

    Alpinestars Alpinestars SM7 Helmet - Cast

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Alpinestars SM7 in the Cast Gloss Blue/Pink/Yellow Fluo graphic: a fiberglass, carbon and aramid motocross helmet with PLASMA impact technology, 20 vent ports and the A-Head fit system. Features Multi-layer shell is constructed from a blend of fiberglass, carbon, and aramid fiber from the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability, and durability Engineered for off-roading racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight, helmet while its supremely aerodynamic composite shell delivers exceptional impact protection A-Head Fitment and Visor Detaching System, the SM7 is equipped with PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area Aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction The shell's curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider's head from direct force and referred to the neck and spinal column Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation The fit can be further customized via the Alpinestars replacement cheek pads, which are available in all thicknesses and are exchangeable between all shell sizes Communication System Compatible — Cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers Linings are removable and washable by hand using warm water and neutral soap Fabrics have antimicrobial treatments Crown Pad — Crown pad and neck pad are elastically connected, for better oblique impact management Top Pad — The top pad is removable and adjustable in height thanks to the A-head system Cheek Pads — The cheek pads are fitted 3D foam, with an emergency extraction system (ERS), with a channel for hydration tube installation Cheek pads are interchangeable among all sizes Chin Strap — Chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings, removable covers for washing purpose Integrated channels on both sides to accommodate a hydration system Visor Detaching System features a release mechanism is conceived to avoid the inherent weaknesses in other anchoring systems Visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction PLASMA inside; Alpinestars PLASMA technology is strategically-integrated into the SM7's side pads for high performance shock absorption in a critical area, significantly reducing risk of injuries

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $519.95

  • Alpinestars Supertech M10 Helmet - Jett Lawrence R01 - MIPS® Alpinestars Supertech M10 Helmet - Jett Lawrence R01 - MIPS®

    Alpinestars Alpinestars Supertech M10 Helmet - Jett Lawrence R01 - MIPS®

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Alpinestars Supertech M10 in the Jett Lawrence R01 replica graphic: a 3K carbon multi-composite motocross helmet with MIPS®, 28 vent ports and the A-Head fitment system. Features The S-M10’s design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet’s construction The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts, for optimal ventilation The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination: 1) 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell, 2) Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy, and 3) Aramid fiber layer which provides critical penetration protection Shell is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the four density EPS liner Chin bar profile, where the base area has been specifically sculpted to give a relief section, raised to clear the collarbone, with a softer EPS liner which extends beyond the helmet shell itself, and is covered by a more flexible rubber compound designed to provide a reduced chance of any sort of collarbone injury MIPS® Multi-directional Impact Protection System Removable side pads made from a semi-soft polymer for added protection provide a larger contact area to help spread impact energy Emergency Release System (ERS) Emergency Visor Release and Visor Extension to provide protection from roost and the sun Eject helmet removal system

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $919.95

  • ARAI VX-Pro4 Helmet - Flame - White ARAI VX-Pro4 Helmet - Flame - White

    ARAI ARAI VX-Pro4 Helmet - Flame

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Arai VX-Pro4 in the Flame graphic: a hand-built motocross helmet with a PB-CLC super fiber shell, an intermediate oval fit and emergency-release cheek pads. Features Features intermediate oval shape which fits the majority of head shapes in the North American markets Consistently round and smooth shell, maintaining Glancing Off shape concept Rounded chin bar maintains compact shell length resulting in less protrusion, leaving it less likely to catch and dig during a spill Super Fiber provides 30% higher tensile strength than standard fiberglass and provides increased penetration resistance Peripherally Belted Complex Laminate Construction (PB-CLC) shell Chin bar vent grill installed on a rounded chin bar, mounted from the outside on the exterior vent cap and can be easily removed for cleaning or damage replacement—vent cap also designed to break way from the chin bar in event of impact The Air-Through top-rear-duct center brace also functions as a goggle-strap locator Diffusers can be removed or replaced quickly and easily by removing a single screw on the rear-duct center brace Air outlets on the peak are made larger to compensate for increased lift and is made with durable, yet extremely flexible material, mounted with plastic screws designed to break on impact, so as to not snag on impact which could send energy into the helmet or cause excess rotational force Emergency release cheek pad design allows trained medical personnel easier access to an injured rider, reducing the chance of unintentional injury Removable neck roll allows easy and convenient cleaning of the helmet

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $849.95

  • Sale -10% 6D ATR-2 Helmet - Fusion - Neon Pink 6D ATR-2 Helmet - Fusion - Neon Pink

    6D 6D ATR-2 Helmet - Fusion - Neon Pink

    7 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The 6D ATR-2 in the Fusion Neon Pink graphic: a carbon-composite motocross helmet with 6D's ODS suspension system, a sternum pad and emergency-release cheek pads. Closeout price, while PU stock lasts. Features Sternum Pad – Provides added protection of the chin, jaw and sternum. Clavicle Cut-Away – Provides increased clavicle clearance. Cervical Spine Relief - Rear lower shell incorporates compliant zone at the cervical spine location Roost Guard – Provides additional face protection Omni-Directional Suspension® (ODS®) technology Shell – A proprietary woven blend of advanced aerospace carbon fiber, and composite fiberglass Shear-away visor screws Comfort Liner - Removable, washable comfort liner, Dri-Lex® anti-bacterial fabric Emergency Release Cheek Pads – Removable, washable, Dri-Lex® anti-bacterial fabric Air Flow Management – 9 intake ports, and 6 exhaust ports work in unison with the Air Gap Ventilation System Titanium D-rings Multi-Impact EPP Outer Liner incorporates Isolation Dampening Towers Lightweight with improved center of gravity

    7 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $769.95 $692.99

  • Sale -10% 6D ATR-2 Helmet - Range - Blue

    6D 6D ATR-2 Helmet - Range - Blue

    7 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The 6D ATR-2 in the Range Blue graphic: a carbon-composite motocross helmet with 6D's ODS suspension system, a sternum pad and emergency-release cheek pads. Closeout price, while PU stock lasts. Features Omni-Directional Suspension® (ODS®) technology Shell – A proprietary woven blend of advanced aerospace carbon fiber, and composite fiberglass Clavicle Cut-Away – Provides increased clavicle clearance Cervical Spine Relief - Rear lower shell incorporates compliant zone at the cervical spine location Shear-away visor screws Air Flow Management – 9 intake ports, and 6 exhaust ports work in unison with the Air Gap Ventilation System Sternum Pad – Provides added protection of the chin, jaw and sternum Comfort Liner - Removable, washable comfort liner, Dri-Lex® anti-bacterial fabric Emergency Release Cheek Pads – Removable, washable, Dri-Lex® anti-bacterial fabric Titanium D-rings Roost Guard – Provides additional face protection Multi-Impact EPP Outer Liner incorporates Isolation Dampening Towers Lightweight with improved center of gravity

    7 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $769.95 $692.99

  • Sale -10% 6D ATR-2 Helmet - Delta - Neon Orange 6D ATR-2 Helmet - Delta - Neon Yellow

    6D 6D ATR-2 Helmet - Delta

    6 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The 6D ATR-2 in the Delta graphic: a carbon-composite motocross helmet with 6D's ODS suspension system, a sternum pad and emergency-release cheek pads. Closeout price, while PU stock lasts. Features Omni-Directional Suspension® (ODS®) technology Shell – A proprietary woven blend of advanced aerospace carbon fiber, and composite fiberglass Cervical Spine Relief - Rear lower shell incorporates compliant zone at the cervical spine location Clavicle Cut-Away – Provides increased clavicle clearance. Sternum Pad – Provides added protection of the chin, jaw and sternum. Roost Guard – Provides additional face protection Shear-away visor screws Emergency Release Cheek Pads – Removable, washable, Dri-Lex® anti-bacterial fabric Comfort Liner - Removable, washable comfort liner, Dri-Lex® anti-bacterial fabric Air Flow Management – 9 intake ports, and 6 exhaust ports work in unison with the Air Gap Ventilation System Titanium D-rings

    6 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $769.95 $692.99

  • ARAI VX-Pro4 Helmet - Fragment - Multi ARAI VX-Pro4 Helmet - Fragment - Multi

    ARAI ARAI VX-Pro4 Helmet - Fragment

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Arai VX-Pro4 in the Fragment graphic: a hand-built off-road helmet with a PB-CLC Super Fiber shell, a smooth glancing-off shape and emergency-release cheek pads. Features Peripherally Belted Complex Laminate Construction (PB-CLC) shell Chin bar vent grill installed on a rounded chin bar, mounted from the outside on the exterior vent cap and can be easily removed for cleaning or damage replacement—vent cap also designed to break way from the chin bar in event of impact Features intermediate oval shape which fits the majority of head shapes in the North American markets Consistently round and smooth shell, maintaining Glancing Off shape concept Super Fiber provides 30% higher tensile strength than standard fiberglass and provides increased penetration resistance Rounded chin bar maintains compact shell length resulting in less protrusion, leaving it less likely to catch and dig during a spill The Air-Through top-rear-duct center brace also functions as a goggle-strap locator Diffusers can be removed or replaced quickly and easily by removing a single screw on the rear-duct center brace Removable neck roll allows easy and convenient cleaning of the helmet Emergency release cheek pad design allows trained medical personnel easier access to an injured rider, reducing the chance of unintentional injury Air outlets on the peak are made larger to compensate for increased lift and is made with durable, yet extremely flexible material, mounted with plastic screws designed to break on impact, so as to not snag on impact which could send energy into the helmet or cause excess rotational force

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $849.95

  • Alpinestars SM3 Helmet - Heat - Gloss Red/White/Black Alpinestars SM3 Helmet - Heat - Gloss Red/White/Black

    Alpinestars Alpinestars SM3 Helmet - Heat

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Alpinestars SM3 in the Heat graphic: a light thermoplastic off-road helmet with a five-density EPS liner, 10 intakes and 7 exhausts. Features Varied thickness shell construction for optimized protection and light weight Optimized for MX, Enduro, and Offroad use Delivers blend of performance, protection, and comfort Features thermo-injected shell incorporating a polymer blend enhanced by varying degrees of thickness that is engineered to deliver the optimal combination of impact protection and light weight Lightweight outer shell is constructed from impact resistant thermoplastic Inner shell constructed with a composite fiber assembled between the outer shell and the EPS liner for maximum protection against impacts Fit can be tailored to the rider's head thanks to the helmet's crown and cheek pads Multiple density inner liner ensures the helmet is equipped with the correct density in the correct area for enhanced impact absorption, while also helping to reduce overall weight 6-piece EPS liner with five densities to effectively manage volume and impact performance Polished inner EPS liner with special coating to reduce friction with comfort liner for rotational impact management The inner and outer surfaces are engineered to minimize the effects of oblique impacts Low friction coating is applied to the inner part of the main EPS liner to reduce the rotational acceleration forces that can result form certain oblique impacts Maximized ventilation and high levels of heat transfer exchange thanks to ten inlets and seven exhaust ports The visor has been designed to direct air into the ports for enhanced airflow Visor release system ensures the visor is released with the correct pre-determined amount of force, effectively reducing the forces on the rider's neck during an impact Comfort liner is constructed using recycled materials for a lower carbon footprint Hydration tube channels are integrated into the helmet's cheek pads for convenience and performance Soft textile chin strap is 25 mm for optimal safety and rider comfort Equipped with an Emergency Release System and removable cheek pads to permit the safe and easy removal of the cheek pads while the helmet is still on, while the 3D contoured foam ensures rider comfort Chin area optimized for superior impact performance Stainless steel D-rings ensure a tight and secure fit

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $279.95

  • Alpinestars Supertech M10 Helmet - Fame - MIPS® Alpinestars Supertech M10 Helmet - Fame - MIPS®

    Alpinestars Alpinestars Supertech M10 Helmet - Fame - MIPS®

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Alpinestars Supertech M10 in the Fame Black Carbon graphic: a premium MIPS®-equipped motocross helmet with a carbon-composite shell, 28 vents and the A-Head fit system. Features The S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts Eject technology includes the eject helmet removal system Rotational acceleration and oblique impact performance Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $839.95

  • Alpinestars Supertech M10 Helmet - Flood - MIPS® - Black/Dark Gray Alpinestars Supertech M10 Helmet - Flood - MIPS® - Black/Dark Gray

    Alpinestars Alpinestars Supertech M10 Helmet - Flood - MIPS®

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Alpinestars Supertech M10 in the Flood graphic: a premium MIPS®-equipped motocross helmet with a carbon-composite shell, 28 vents and the A-Head fit system. Features The S-M10's design offers a smooth, attractive, aerodynamic profile which is streamlined and free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction Surface curvature promotes reduced friction on impact, allowing deflection and transfer of energy to protect the rider's head from direct force to the skull and referred to the neck and spinal column The S-M10 shell sizing solution ensures each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs, thus ensuring riders have the correct fit to improve comfort, reduce overall weight, and improve effectiveness of the helmet in an impact Chin bar's base area specifically sculpted to give a relief section and raised to clear the collarbone Soft EPS liner extends beyond the helmet shell itself and is covered by a flexible rubber compound providing a reduced chance of any sort of collarbone injury A-Head Fitment System allows easy adjustment of the angle and height that the helmet sits on the head Ultra-ventilated helmet with 28 individual intake and exhaust ports, not including the eye port, with 18 intakes and 10 exhausts Eject technology includes the eject helmet removal system Rotational acceleration and oblique impact performance Removable side pads, made from a semi-soft polymer for added protection, provide contact area to help spread impact energy Emergency Release System (ERS) Emergency Visor Release and Visor Extension provides protection

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $839.95

  • Alpinestars SM7 Helmet - Core - Matte Orange/Blue Alpinestars SM7 Helmet - Core - Matte Orange/Blue

    Alpinestars Alpinestars SM7 Helmet - Core

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Alpinestars SM7 Core: a light, ultra-vented off-road helmet with a fiberglass/carbon/aramid shell, PLASMA inserts and a breakaway visor. Features Multi-layer shell is constructed from a blend of fiberglass, carbon, and aramid fiber from the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability, and durability Engineered for off-roading racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight, helmet while its supremely aerodynamic composite shell delivers exceptional impact protection A-Head Fitment and Visor Detaching System, the SM7 is equipped with PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area Aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction The shell's curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider's head from direct force and referred to the neck and spinal column Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation The fit can be further customized via the Alpinestars replacement cheek pads, which are available in all thicknesses and are exchangeable between all shell sizes Communication System Compatible — Cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers Linings are removable and washable by hand using warm water and neutral soap Fabrics have antimicrobial treatments Crown Pad — Crown pad and neck pad are elastically connected, for better oblique impact management Top Pad — The top pad is removable and adjustable in height thanks to the A-head system Cheek Pads — The cheek pads are fitted 3D foam, with an emergency extraction system (ERS), with a channel for hydration tube installation Cheek pads are interchangeable among all sizes Chin Strap — Chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings, removable covers for washing purpose Integrated channels on both sides to accommodate a hydration system Visor Detaching System features a release mechanism is conceived to avoid the inherent weaknesses in other anchoring systems Visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction PLASMA inside; Alpinestars PLASMA technology is strategically-integrated into the SM7's side pads for high performance shock absorption in a critical area, significantly reducing risk of injuries

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $519.95

  • Alpinestars SM7 Helmet - Deed - Gloss Red/Black/White Alpinestars SM7 Helmet - Deed - Gloss Red/Black/White

    Alpinestars Alpinestars SM7 Helmet - Deed

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The Alpinestars SM7 Deed: a light, ultra-vented off-road helmet with a fiberglass/carbon/aramid shell, PLASMA inserts and a breakaway visor. Features Multi-layer shell is constructed from a blend of fiberglass, carbon, and aramid fiber from the optimum blend of impact protection and force dissipation, sliding performance, energy absorption, stability, and durability Engineered for off-roading racing, and is optimized to offer the perfect blend of superior ventilation and comfort in a lightweight, helmet while its supremely aerodynamic composite shell delivers exceptional impact protection A-Head Fitment and Visor Detaching System, the SM7 is equipped with PLASMA technology at the lower side of the shell edge for optimum energy dissipation in case of contact with the collar bone area Aerodynamic profile design offers a smooth, streamlined shell free of any external channels and features that might act as a load point in an impact or compromise the overall integrity of the helmet's construction The shell's curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider's head from direct force and referred to the neck and spinal column Ultra-ventilated helmet with 20 individual intake and exhaust ports, not including the eye port, with 13 intakes and 7 exhausts, for optimum ventilation The fit can be further customized via the Alpinestars replacement cheek pads, which are available in all thicknesses and are exchangeable between all shell sizes Communication System Compatible — Cutaway section on the left-side of the EPS to seamlessly accommodate Intercom Systems, with earphone recesses on both sides for speakers Linings are removable and washable by hand using warm water and neutral soap Fabrics have antimicrobial treatments Crown Pad — Crown pad and neck pad are elastically connected, for better oblique impact management Top Pad — The top pad is removable and adjustable in height thanks to the A-head system Cheek Pads — The cheek pads are fitted 3D foam, with an emergency extraction system (ERS), with a channel for hydration tube installation Cheek pads are interchangeable among all sizes Chin Strap — Chin strap is fitted with a 25 mm width nylon strap, stainless steel DD rings, removable covers for washing purpose Integrated channels on both sides to accommodate a hydration system Visor Detaching System features a release mechanism is conceived to avoid the inherent weaknesses in other anchoring systems Visor is engineered to automatically detach from the shell when it is subjected to an impact energy greater than 15 Joules for optimum impact protection, regardless of the direction PLASMA inside; Alpinestars PLASMA technology is strategically-integrated into the SM7's side pads for high performance shock absorption in a critical area, significantly reducing risk of injuries

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $519.95

  • CloseoutSale -18% 6D ATR-1 Helmet Liner - Black/Silver

    6D 6D ATR-1 Helmet Liner - Black/Silver

    3 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    The 6D ATR-1 Helmet Liner (replacement comfort liner for the 6D ATR-1 helmet) at closeout pricing. Limited sizes available while supplies last. Features Genuine 6D replacement comfort liner for the ATR-1 helmet Black/silver liner with ODS (Omni-Directional Suspension) branding Size 2XL: match the size of your ATR-1 helmet

    3 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $55.00 $44.99

  • CloseoutSale -28% Alpinestars Bionic-10 Carbon Knee Brace Alpinestars Bionic-10 Carbon Knee Brace

    Alpinestars Alpinestars Bionic-10 Carbon Knee Brace

    10 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features Sold individually (left or right) - choose your side Lightweight hybrid frame with carbon composite cores over-injected with fiber-reinforced polymer Lighter than its predecessor with high structural strength and support Performs at temperatures as low as -4°F Double-pivoting hinge with tool-free, exchangeable extension stops to help prevent hyperextension Highly ventilated double-wall knee cup for impact dispersion and absorption Triple-segmented polymer kneecup with light padding Integrated mechanical guiding system keeps the kneecup accurately positioned Channeled padding and mesh zones for ventilation Lightweight single straps with buckle system and C-Frame strap system CE-certified to Level 1 Closeout item - final sale. Limited sizes and colors, while supplies last.

    10 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $429.95 $309.99

  • CloseoutSale -15% Alpinestars Pro-Dura Long-Sleeve Jersey - Black/Bright Red/White Alpinestars Pro-Dura Long-Sleeve Jersey - Black/Bright Red/White

    Alpinestars Alpinestars Pro-Dura Long-Sleeve Jersey

    18 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features Engineered for the demands of Enduro riding Durable, high-resistance poly jersey fabric Laser perforations for breathability and ventilation Elongated rear for greater coverage in the riding position Lighter-weight back panel for breathability Stretch Lycra® cuffs and collar Closeout item - final sale. Limited sizes and colors, while supplies last.

    18 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $79.95 $67.99

  • CloseoutSale -27% Alpinestars Supertech M10 Helmet - TLD Edition 25 - MIPS® Alpinestars Supertech M10 Helmet - TLD Edition 25 - MIPS®

    Alpinestars Alpinestars Supertech M10 Helmet - TLD Edition 25 - MIPS®

    19 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features Lightweight outer shell constructed from advanced composite materials in four shell sizes for a superior fit Fitted with E-2, the latest generation of MIPS®, a low-friction layer designed to reduce rotational motion transferred to the brain from angled impacts Multiple-density inner helmet liner ERS Emergency Visor Release and Visor Extension provide protection from roost and the sun Alpinestars A-Head Fitment System allows easy adjustment of angle and height Superior ventilation system with 18 intake and 10 exhaust ports Raised chin bar clears the collarbone, with a softer EPS liner to reduce the chance of collarbone injury Emergency-release, removable cheek pads with 3D contoured foam Removable comfort liner uses anti-moisture and antibacterial fabrics Hydration system and E-Ject prepared Lightweight: approx. 1260 g / 1310 g with side pads, 1370 g with visor extension DOT certified Closeout item - final sale. Limited sizes and colors, while supplies last.

    19 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $799.95 $579.99

  • CloseoutSale -28% Alpinestars Supertech M10 Helmet - Ampress - MIPS® - Matte Black/White Alpinestars Supertech M10 Helmet - Ampress - MIPS® - Matte Black/White

    Alpinestars Alpinestars Supertech M10 Helmet - Ampress - MIPS®

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features Lightweight outer shell constructed from advanced composite materials in four shell sizes for a superior fit Fitted with E-2, the latest generation of MIPS®, a low-friction layer designed to reduce rotational motion transferred to the brain from angled impacts Multiple-density inner helmet liner ERS Emergency Visor Release and Visor Extension provide protection from roost and the sun Alpinestars A-Head Fitment System allows easy adjustment of angle and height Superior ventilation system with 18 intake and 10 exhaust ports Raised chin bar clears the collarbone, with a softer EPS liner to reduce the chance of collarbone injury Emergency-release, removable cheek pads with 3D contoured foam Removable comfort liner uses anti-moisture and antibacterial fabrics Hydration system and E-Ject prepared Lightweight: approx. 1260 g / 1310 g with side pads, 1370 g with visor extension DOT certified Closeout item - final sale. Limited sizes and colors, while supplies last.

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $719.95 $519.99

  • Z1R Dirt Maxx Helmet - Vortex Z1R Dirt Maxx Helmet - Vortex

    Z1R Z1R Dirt Maxx Helmet - Vortex

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features: Dual density EPS liner for progressive impact absorption Injection molded polycarbonate shell Fully removable polyester moisture wicking liner and cheek pads 13 intake/exhaust ports for maximum ventilation D-ring chin strap retention system Intermediate oval helmet shape

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $129.95

  • ARAI XD-5 Helmet - Solid ARAI XD-5 Helmet - Solid

    ARAI ARAI XD-5 Helmet - Solid

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features: The forehead area of the shell is reinforced by a super fiber belt which is similar to the way in which bands strengthen a barrel PB-cLc² shell is assembled using an assortment of materials VAS-A shield system lowered to further improve 'glancing off' ability Peak designed for more effective ventilation, increased high speed flow-through performance, greater range of adjustability for blocking the sun, and is more resistant to buffeting VAS-A Shield System allows for easier and faster shield swaps without the need for any tools Mouth Shutter allows for more fresh air without the need for the mesh vents as seen on predecessors Inner Shutter works in conjunction with the mouth shutter to adjust the amount of airflow entering the helmet Front Logo Duct allows for airflow that is unaffected by the rider's position VAS-A Max-Vision Shield preserves the wide field-of-view and high level of visibility expected of an XD model, and accepts an optional Pinlock® insert AR Spoiler reduces fatigue from turbulent air throughout long rides and works to draw out hot air from the crown area Odor-Resistant Interior has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties Air Flap retractable pull-down spoiler reduces wind intrusion and helps reduce shield fogging Device Compatibility – Hyper-Ridge® re-sculpted with flat surface on the sides for easy installation of communication devices Speaker Pocket – deep, wide ear pockets accommodate even the thickest speakers, with cable management built into the neck roll View Size Chart

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $929.95 - $949.95

  • ARAI VX-Pro4 Helmet - White ARAI VX-Pro4 Helmet - White

    ARAI ARAI VX-Pro4 Helmet - White

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features: Peripherally Belted Complex Laminate Construction (PB-CLC) shell Chin bar vent grill installed on a rounded chin bar, mounted from the outside on the exterior vent cap and can be easily removed for cleaning or damage replacement—vent cap also designed to break away from the chin bar in event of impact Features intermediate oval shape which fits the majority of head shapes in the North American markets Consistently round and smooth shell, maintaining Glancing Off shape concept Super Fiber provides 30% higher tensile strength than standard fiberglass and provides increased penetration resistance Rounded chin bar maintains compact shell length resulting in less protrusion, leaving it less likely to catch and dig during a spill The Air-Through top-rear-duct center brace also functions as a goggle-strap locator Diffusers can be removed or replaced quickly and easily by removing a single screw on the rear-duct center brace Removable neck roll allows easy and convenient cleaning of the helmet Emergency release cheek pad design allows trained medical personnel easier access to an injured rider, reducing the chance of unintentional injury View Size Chart

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $699.95

  • 6D ATR-2 Helmet - Mach 6D ATR-2 Helmet - Mach

    6D 6D ATR-2 Helmet - Mach

    13 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features: Sternum Pad – Provides added protection of the chin, jaw and sternum. Clavicle Cut-Away – Provides increased clavicle clearance. Cervical Spine Relief - Rear lower shell incorporates compliant zone at the cervical spine location Roost Guard – Provides additional face protection Omni-Directional Suspension® (ODS®) technology Shell – A proprietary woven blend of advanced aerospace carbon fiber, composite fiberglass, and Kevlar Shear-away visor screws Comfort Liner - Removable, washable comfort liner, Dri-Lex® anti-bacterial fabric Emergency Release Cheek Pads – Removable, washable, Dri-Lex® anti-bacterial fabric Air Flow Management – 9 intake ports, and 6 exhaust ports work in unison with the Air Gap Ventilation System Titanium D-rings Multi-Impact EPP Outer Liner incorporates Isolation Dampening Towers Lightweight with improved center of gravity View Size Chart

    13 in stock Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $692.99

  • Alpinestars Tech 7 Boots Alpinestars Tech 7 Boots

    Alpinestars Alpinestars Tech 7 Boots

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    Features Tech 7 has been completely overhauled to ensure exceptional off-road performance in the dirt Engineered to be lighter, more comfortable and more protective than ever to deliver exceptional feel on the bike Thermoplastic Polyurethane (TPU) lower shell features an innovative design on the shifter area for reduced front roll and easy shift lever control, with a dedicated design for the left and right foot Further strengthened with a metal shank and is reinforced on the toe zone for impact and abrasion resistance Equipped with a medial and lateral double pivot system for improved levels of flexibility and precision control Dedicated design on medial side wall for improving feel, support, and grip on the bike, while increasing protection and durability of the boot Contoured TPU calf protector plate offers effective impact resistance Main flexion of the boot is supported around the medial and lateral ankle by a low profile pivot system for superior freedom of movement and rider comfort Front flexion zone features innovative shock absorbing inserts in the front bellow zone for progressive support Shock absorbing padding is also strategically positioned on the ankles and shin plate for increased impact absorption Strap holder design offers maximum rotation and functionality, while reducing excessive rotation Sole is made with an innovative wear limit indicator embedded in the foot peg area, this layer displays a red layer alerting the rider when the sole is worn out and needs replacing Boot structure beneath wear limit indicator is surrounded by a layer that maintains structure and integrity of the boot while also protecting it Closure system includes polymer buckles plus an aluminum frame with self-aligning, quick release closures for a customized secure fitment Buckle receiver is engineered to be self-aligning, guaranteeing a secure fit while preventing strap rotation Soft microfiber gaiter features a dedicated design especially for back of the boot that effectively seals out excessive water and dirt entry Extended medial panel is constructed from TPU and its new design incorporates an enlarged rubber insert for maximum grip contact with bike and improved heat and abrasion resistance Pull flap is engineered to offer increased prehensility Updated and compact TPU shin plate construction for greater range of fitment, equipped with a reinforced hook and loop closure for a comfortable, highly customized fit Upper features extensive TPU protection on toes, foot, heel, ankle, calf, and shin with extra hard compounds on toe-box and heel for additional impact and abrasion resistance Upper suede leather with a lightweight microfiber construction for superior impact and abrasion resistance Additional TPU rear bridge for protecting the Achilles tendons Equipped with a poly-fabric lining with 3D open cell foam and anti-sliding suede reinforcement on the heel area for enhanced abrasion resistance One-piece sole is constructed from a highly durable, dual compound vulcanized rubber for durability and protection Sole is replaceable

    Ships within 24 hours  Orders placed before 2pm CST ship the same business day. Orders placed after 2pm CST on Friday, or anytime Saturday or Sunday, ship the following Monday. You will receive a tracking number by email once your order ships.

    $499.95


You have seen 24 out of 34 products

Off-road motorcycle gear for motocross, enduro and trail riding. Shop helmets, boots and protective gear built for the dirt.

Login

Forgot your password?

Don't have an account yet?
Create account